CivCast · Heath, TX

Heath Water Wells 2 & 4

City of HeathIssuing agency·Heath, TX·via CivCast, the bid board Texas civil engineers advertise on

9days left

Due Oct 20, 2026·Posted Sep 15, 2026

Prequalify For BondingBonding Prequal

AI takeaways

The City of Heath is soliciting bids for the construction of two potable water wells, Water Wells 2 & 4, in Heath, TX.
Bids are due October 13, 2026, with a pre-bid meeting on September 29, 2026, and questions due October 2, 2026.
The work includes drilling and completion of two approximately 3,420 ft deep wells, installation of well casing, column pipe, blank liner, stainless steel screening, discharge piping, electrical equipment, pump, motor, treatment, and site civil improvements.
The issuing agency is the City of Heath.
Requirement: Bidders must submit questions through the Q&A portal by the posted deadline of 11:45 PM, Friday, October 2, 2026.

Pre-bid: Sep 29

These takeaways are AI-generated and may be incomplete or wrong. Always verify every detail against the official documents before you bid.

Want to know if you can be bonded for this project? Get prequalified.One free application, soft pull — sized to your work.

Know you can be bonded before you spend a week on the bid
No scramble for a bond at the deadline — it becomes a request form
A good guy letter to show a GC or agency

Prequalify For Bonding →

Contact the buyer

Tanner Henson

tanner.henson@kimley-horn.comEmail 6823485245Phone

Location:

Rockwall County, TX

Open in Maps ↗

Project

6aa9b943c7751fcbc9922ec4

064467609

Category

Water Well Construction

Posted

Sep 15, 2026

Source

CivCast

What this bid is asking for

AI-generated

Install two potable water wells, each approximately 3,420 ft deep, at the City of Heath's north elevated storage tank and pump station.
Drill and complete the wells, including installation of well casing, column pipe, blank liner, stainless steel screening, and discharge piping.
Furnish and install electrical equipment, pump, motor, treatment systems, and perform site civil improvements.
Provide electrical and instrumentation work including switchboards, transformers, VFDs, and SCADA integration, including programming services by Supertech Automation.

Posted Scope of Work

Work of the project generally includes the installation of one potable water well at the City of Heath’s north elevated storage tank and one potable water well at the City of Heath’s pump station. The work at each well includes but is not limited to: Drilling and completion of two approximately 3,420 ft deep wells, installation of well casing, column pipe, blank liner, stainless steel screening, discharge piping, associated pipe appurtenances, electrical equipment, pump, motor, treatment, and site civil improvements.

Type of work: Water Well Construction

Pre-bid meeting: September 29, 2026 at 2:00 PM (Chicago) — Heath City Hall

Bid opening: October 20, 2026 at 2:00 PM (Chicago) — Heath City Hall

Questions due: October 9, 2026 at 11:45 PM (Chicago)

Questions asked: 20

Bid documents (download requires a free CivCast account):

Heath Water Wells 2 & 4 PLANS.pdf (Bid Docs) — 48 pp.
Heath Water Wells 2 & 4 SPECS.pdf (Bid Docs) — 705 pp.
Addendum 1.pdf (Addenda) — 2 pp.
Pre bid conference minutes.pdf (Other) — 4 pp.
Addendum 2.pdf (Addenda) — 1 pp.
Addendum 3.pdf (Addenda) — 61 pp.
Addendum 4.pdf (Addenda) — 95 pp.
Addendum 5.pdf (Addenda) — 43 pp.

Scope, read from the documentsAI-generated

More excavating bids in Texas, weekly.

We post new excavating opportunities in Texas as agencies publish them. Get them in one email — free, and unsubscribe whenever.

Questions & answers

AI-generated

When is the pre-bid meeting?

The pre-bid meeting is on September 29, 2026 at 2:00 PM (Chicago) at Heath City Hall.

When are bids due?

Bids are due on October 13, 2026 at 2:00 PM (Chicago) at Heath City Hall.

What is the deadline for submitting questions?

The deadline to ask questions is 10/02/2026 11:45 PM.

Who is the contact for this solicitation?

The contact is Tanner Henson at Kimley-Horn, email tanner.henson@kimley-horn.com, phone 6823485245.

Full source recordEvery field CivCast published, untouched

6aaa9233c9264aba03a75f4c

User Id

7b783c94-f076-4495-9ca5-31fe539a89c7

Answers

Content: "An estimated cost is not available."
Answer Id: "8e5784b6-38ec-4269-bee4-b631fba5e91e"
Created At: "2026-09-28T23:27:37.515Z"
Is Disabled: false

Content

Is there an estimated cost or cost range for this project?

Created At

Sep 16, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Id: 6ab1d8924f7293197057fd29
User Id: 10cf9d37-e809-41a2-81b3-be02123afdff
Content: SCA Consultants - Request for Clarification - Water Wells 2 & 4 - Bid Item No. 13, Electrical and Instrumentation Five items. Items 2, 3 and 4 affect price. ITEM 1. The CIVCAST portal and Instructions to Bidders 7.03 give different deadlines for written questions. The CIVCAST Questions tab for this Project displays: “The deadline to ask questions is 10/02/2026 11:45 PM.” The Invitation, under Obtaining the Bidding Documents, states: “Please submit questions for this project at least 7 business days prior to bid opening through www.civcastusa.com in the Q&A portal,” and seven business days before Tuesday, October 13, 2026 is Friday, October 2, 2026, which agrees with the portal. Instructions to Bidders 7.03 states that “Questions received less than seven days prior to the date for opening of Bids may not be answered,” which against the same bid date is Tuesday, October 6, 2026. A Bidder working from Instructions to Bidders 7.03 alone would believe two further business days remained. REQUEST: Please confirm by Addendum that the operative deadline for written questions is the posted 11:45 PM, Friday, October 2, 2026, and that Instructions to Bidders 7.03 is superseded for this solicitation, so that no Bidder relies on the later date. ITEM 2. No short circuit, protective device coordination or arc flash study is specified, while the switchboard breakers are specified to reduce arc flash incident energy. The switchboard section requires that “Breakers shall have LSIG trip unit with an alternate maintenance setting switch for reducing arc flash incident energy levels.” An energy-reducing maintenance setting is set against a calculated incident energy, and no calculation is called for: the terms arc flash study, short circuit study, coordination study and power system study appear nowhere in the Specifications, no Division 26 section governs such a study, and Bid Item No. 13 does not name one. The system these settings protect is not a simple one. Bid Item No. 13 establishes an 800 ampere main switchboard at Water Well 2 and a 600 ampere main switchboard at Water Well 4, each with a manual transfer switch and generator termination cabinet, each feeding a NEMA 3R 480:2,400 volt step-up isolation transformer of 450 kVA and 400 kVA respectively, a 2,400 volt VFD breaker enclosure and a NEMA 3R 6-pulse variable frequency drive serving a 2,300 volt three-phase motor. Nothing in the Contract Documents states the available fault current at either service point, the basis for the interrupting and short-circuit current ratings of the two switchboards, or how protective devices are to be coordinated across the step-up transformers to the medium-voltage drives. REQUEST: Please confirm whether a short circuit, protective device coordination and arc flash hazard analysis is required of the Contractor for both well sites. If it is, please state the Bid Item under which it is to be priced and the standard to which it is to be performed, and please provide the serving utility’s available short-circuit current and X/R ratio at each 480/277 volt service point so that the switchboard ratings and the breaker maintenance settings can be established. ITEM 3. Bid Item No. 13 includes a named third party’s programming services with no stated basis for pricing them. Bid Item No. 13, Electrical and Instrumentation, is measured for payment on a lump sum basis and states: “This bid item includes programming services by Supertech Automation for integrating the proposed well site into the City’s existing SCADA system, including reprogramming of the existing PLCs at the well sites and modification of the existing SCADA HMI.” No allowance amount, no not-to-exceed figure and no pass-through mechanism is stated for those services, and the Contract Documents contain no scope of services, point count or schedule for them. Bidders cannot price another firm’s services on a lump sum item without a stated basis, and no two Bids for Bid Item No. 13 will presently mean the same thing. REQUEST: Please state how Supertech Automation’s programming services are to be carried in Bid Item No. 13 — as a fixed allowance of a stated amount, as a direct pass-through at cost, or as the Contractor’s own subcontract — and, if the Contractor is to subcontract them, please issue Supertech Automation’s scope of services and a contact so that a quotation can be obtained before the Bid. ITEM 4. The division of responsibility between the named programming services and the Contractor’s control and SCADA scope is not stated. Bid Item No. 13 places “instrumentation, SCADA hardware, junction boxes, fittings, appurtenances, and accessories” in the Contractor’s scope at both wells. The Conduit Schedules show new Well Pump Control Panels CP-01-002 and CP-01-004 fed from panelboards LP-01-002 and LP-01-004, each receiving twenty-two conductors and a twisted shielded pair from its well pump terminal box, and the Well 4 Conduit Schedule carries a CAT6e run from CP-01-004 to the EXISTING PLC. The named services are described as reprogramming of the existing PLCs and modification of the existing SCADA HMI. REQUEST: Please confirm that the new Well Pump Control Panels, the new field instrumentation and the SCADA hardware named in Bid Item No. 13 are furnished, assembled, configured, field tested and commissioned by the Contractor, and that the named programming services are limited to reprogramming the existing PLCs and modifying the existing SCADA HMI. Please also confirm which party is responsible for point-to-point verification between the new control panels and the existing PLCs. ITEM 5. The Conduit Schedules carry a transformer tag collision at Water Well 4 and repeated destination errors at both wells. On the Water Well 4 Conduit Schedule, circuits 5 and 6 identify TRANSFORMER (XMFR-01-004) as the 480:2,400 volt step-up isolation transformer between the main switchboard and the VFD breaker enclosure, while circuits 10 and 11 identify TRANSFORMER (XMFR-01-004) again as the 480:120/240 volt panel transformer between the main switchboard and panelboard LP-01-004. At Water Well 2 the corresponding devices are correctly given two tags, XMFR-01-002 and XMFR-02-002. Separately, at both wells the circuits described as CHLORINE ROOM RECEPTACLES and CHLORINE ROOM LIGHTING are scheduled to terminate at AMMONIA ROOM RECEPTACLES and AMMONIA ROOM LIGHTING; the circuit described as CHLORINE ELECTRONIC SCALE POWER is scheduled to terminate at BOOSTER PUMP No. 1 at Well 2 and BOOSTER PUMP No. 3 at Well 4; and at Well 2 the CHLORINE ROOM HVAC UNIT is fed from LOAD CENTER (LP-02-001), the ammonia room load center, rather than from LP-02-002. REQUEST: Please issue a corrected Conduit Schedule for both wells by Addendum, assigning a distinct tag to the Water Well 4 panel transformer and correcting the destinations of the chlorine room receptacle, lighting, electronic scale and HVAC circuits.
Created At: Sep 22, 2026
Project Id: 6aa9b943c7751fcbc9922ec4

6ab1f5315e2583d6b33f5321

User Id

10cf9d37-e809-41a2-81b3-be02123afdff

Answers

Content: "This is addressed in Addendum 1."
Answer Id: "1e28efb7-1cb8-4b47-87f8-fdf27cef7f5b"
Created At: "2026-09-28T23:28:04.416Z"
Is Disabled: false

Content

SCA Consultants - Water Wells 2 & 4 - Bid Item No. 13, Electrical and Instrumentation. Question 1 of 5, re-posted individually. This supersedes our consolidated question of September 22, 2026, which combined all five; no new matter is raised. The CIVCAST portal and Instructions to Bidders 7.03 give different deadlines for written questions. The CIVCAST Questions tab for this Project displays: “The deadline to ask questions is 10/02/2026 11:45 PM.” The Invitation, under Obtaining the Bidding Documents, states: “Please submit questions for this project at least 7 business days prior to bid opening through www.civcastusa.com in the Q&A portal,” and seven business days before Tuesday, October 13, 2026 is Friday, October 2, 2026, which agrees with the portal. Instructions to Bidders 7.03 states that “Questions received less than seven days prior to the date for opening of Bids may not be answered,” which against the same bid date is Tuesday, October 6, 2026. A Bidder working from Instructions to Bidders 7.03 alone would believe two further business days remained. REQUEST: Please confirm by Addendum that the operative deadline for written questions is the posted 11:45 PM, Friday, October 2, 2026, and that Instructions to Bidders 7.03 is superseded for this solicitation, so that no Bidder relies on the later date.

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ab1f54f5e2583d6b33f5329

User Id

10cf9d37-e809-41a2-81b3-be02123afdff

Answers

Content: "Arc flash studies, fault current analyses, and breaker coordination studies are required for both well sites per Note 2 on Sheets E9 and E10. The contractor shall coordinate with the utility company to obtain transformer data for the new electrical service. "
Answer Id: "86f286da-f3b2-494c-9a9b-31fedd9ef472"
Created At: "2026-09-28T23:28:17.18Z"
Is Disabled: false

Content

SCA Consultants - Water Wells 2 & 4 - Bid Item No. 13, Electrical and Instrumentation. Question 2 of 5, re-posted individually. This supersedes our consolidated question of September 22, 2026, which combined all five; no new matter is raised. No short circuit, protective device coordination or arc flash study is specified, while the switchboard breakers are specified to reduce arc flash incident energy. The switchboard section requires that “Breakers shall have LSIG trip unit with an alternate maintenance setting switch for reducing arc flash incident energy levels.” An energy-reducing maintenance setting is set against a calculated incident energy, and no calculation is called for: the terms arc flash study, short circuit study, coordination study and power system study appear nowhere in the Specifications, no Division 26 section governs such a study, and Bid Item No. 13 does not name one. The system these settings protect is not a simple one. Bid Item No. 13 establishes an 800 ampere main switchboard at Water Well 2 and a 600 ampere main switchboard at Water Well 4, each with a manual transfer switch and generator termination cabinet, each feeding a NEMA 3R 480:2,400 volt step-up isolation transformer of 450 kVA and 400 kVA respectively, a 2,400 volt VFD breaker enclosure and a NEMA 3R 6-pulse variable frequency drive serving a 2,300 volt three-phase motor. Nothing in the Contract Documents states the available fault current at either service point, the basis for the interrupting and short-circuit current ratings of the two switchboards, or how protective devices are to be coordinated across the step-up transformers to the medium-voltage drives. REQUEST: Please confirm whether a short circuit, protective device coordination and arc flash hazard analysis is required of the Contractor for both well sites. If it is, please state the Bid Item under which it is to be priced and the standard to which it is to be performed, and please provide the serving utility’s available short-circuit current and X/R ratio at each 480/277 volt service point so that the switchboard ratings and the breaker maintenance settings can be established.

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ab1f5695e2583d6b33f5333

User Id

10cf9d37-e809-41a2-81b3-be02123afdff

Answers

Content: "Bid Item No. 13 includes the programming services by Supertech Automation required to integrate the proposed well sites into the City’s existing SCADA system, including modifications to the existing PLC and SCADA HMI as indicated in the Contract Documents. Refer to Section 26 09 10, Instrumentation, including Paragraph 1.04, for system responsibility and coordination requirements. The Contractor shall coordinate directly with Supertech Automation during the bid period to establish the required scope of programming and integration services necessary to provide a complete and functional system and shall include the associated services in Bid Item No. 13."
Answer Id: "ab936f85-5bf6-49b7-8d85-80ffb1dde8af"
Created At: "2026-09-28T23:28:27.044Z"
Is Disabled: false

Content

SCA Consultants - Water Wells 2 & 4 - Bid Item No. 13, Electrical and Instrumentation. Question 3 of 5, re-posted individually. This supersedes our consolidated question of September 22, 2026, which combined all five; no new matter is raised. Bid Item No. 13 includes a named third party’s programming services with no stated basis for pricing them. Bid Item No. 13, Electrical and Instrumentation, is measured for payment on a lump sum basis and states: “This bid item includes programming services by Supertech Automation for integrating the proposed well site into the City’s existing SCADA system, including reprogramming of the existing PLCs at the well sites and modification of the existing SCADA HMI.” No allowance amount, no not-to-exceed figure and no pass-through mechanism is stated for those services, and the Contract Documents contain no scope of services, point count or schedule for them. Bidders cannot price another firm’s services on a lump sum item without a stated basis, and no two Bids for Bid Item No. 13 will presently mean the same thing. REQUEST: Please state how Supertech Automation’s programming services are to be carried in Bid Item No. 13 — as a fixed allowance of a stated amount, as a direct pass-through at cost, or as the Contractor’s own subcontract — and, if the Contractor is to subcontract them, please issue Supertech Automation’s scope of services and a contact so that a quotation can be obtained before the Bid.

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ab1f5825e2583d6b33f533f

User Id

10cf9d37-e809-41a2-81b3-be02123afdff

Answers

Content: "The contractor is responsible for furnishing, installing, and programming the proposed PLC at the well site. This responsibility also includes integrating the new PLC signals with the existing PLC system, modifying the existing PLC as required to accept those signals, and ensuring proper communication and reporting to the SCADA system. The contractor’s system integrator shall be responsible for reprogramming the existing PLC to accommodate the proposed Well 4 PLC signals, integrating the associated control and monitoring functions, and verifying operation between the new PLC, the existing PLC, and the SCADA system. "
Answer Id: "4fd4f80a-588e-473a-8c0f-7b2131d70c6c"
Created At: "2026-09-28T23:28:38.113Z"
Is Disabled: false

Content

SCA Consultants - Water Wells 2 & 4 - Bid Item No. 13, Electrical and Instrumentation. Question 4 of 5, re-posted individually. This supersedes our consolidated question of September 22, 2026, which combined all five; no new matter is raised. The division of responsibility between the named programming services and the Contractor’s control and SCADA scope is not stated. Bid Item No. 13 places “instrumentation, SCADA hardware, junction boxes, fittings, appurtenances, and accessories” in the Contractor’s scope at both wells. The Conduit Schedules show new Well Pump Control Panels CP-01-002 and CP-01-004 fed from panelboards LP-01-002 and LP-01-004, each receiving twenty-two conductors and a twisted shielded pair from its well pump terminal box, and the Well 4 Conduit Schedule carries a CAT6e run from CP-01-004 to the EXISTING PLC. The named services are described as reprogramming of the existing PLCs and modification of the existing SCADA HMI. REQUEST: Please confirm that the new Well Pump Control Panels, the new field instrumentation and the SCADA hardware named in Bid Item No. 13 are furnished, assembled, configured, field tested and commissioned by the Contractor, and that the named programming services are limited to reprogramming the existing PLCs and modifying the existing SCADA HMI. Please also confirm which party is responsible for point-to-point verification between the new control panels and the existing PLCs.

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ab1f59d5e2583d6b33f534d

User Id

10cf9d37-e809-41a2-81b3-be02123afdff

Answers

Content: "Corrected Conduit Schedules have been provided in Addendum 1."
Answer Id: "21e8f489-ba54-4ea0-972a-e1079b62d664"
Created At: "2026-09-28T23:28:47.915Z"
Is Disabled: false

Content

SCA Consultants - Water Wells 2 & 4 - Bid Item No. 13, Electrical and Instrumentation. Question 5 of 5, re-posted individually. This supersedes our consolidated question of September 22, 2026, which combined all five; no new matter is raised. The Conduit Schedules carry a transformer tag collision at Water Well 4 and repeated destination errors at both wells. On the Water Well 4 Conduit Schedule, circuits 5 and 6 identify TRANSFORMER (XMFR-01-004) as the 480:2,400 volt step-up isolation transformer between the main switchboard and the VFD breaker enclosure, while circuits 10 and 11 identify TRANSFORMER (XMFR-01-004) again as the 480:120/240 volt panel transformer between the main switchboard and panelboard LP-01-004. At Water Well 2 the corresponding devices are correctly given two tags, XMFR-01-002 and XMFR-02-002. Separately, at both wells the circuits described as CHLORINE ROOM RECEPTACLES and CHLORINE ROOM LIGHTING are scheduled to terminate at AMMONIA ROOM RECEPTACLES and AMMONIA ROOM LIGHTING; the circuit described as CHLORINE ELECTRONIC SCALE POWER is scheduled to terminate at BOOSTER PUMP No. 1 at Well 2 and BOOSTER PUMP No. 3 at Well 4; and at Well 2 the CHLORINE ROOM HVAC UNIT is fed from LOAD CENTER (LP-02-001), the ammonia room load center, rather than from LP-02-002. REQUEST: Please issue a corrected Conduit Schedule for both wells by Addendum, assigning a distinct tag to the Water Well 4 panel transformer and correcting the destinations of the chlorine room receptacle, lighting, electronic scale and HVAC circuits.

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ab2adb99a741861aa22917d

User Id

a835e3de-f1a2-47e5-81af-fecd3ba0ce5e

Answers

Content: "Contractor shall bid the project as designed and indicated in the contract documents."
Answer Id: "584f6993-acf2-4592-8655-355acbada4b2"
Created At: "2026-09-30T20:59:53.929Z"
Is Disabled: true

Content: "This is addressed in Addendum 3."
Answer Id: "10028716-2e81-4f09-859b-68337f2ff851"
Created At: "2026-10-08T17:58:33.469Z"
Is Disabled: false

Content

In lieu of a 2,300 V VFD, would a low-voltage VFD be acceptable? This would require the transformer configuration shown on the one-line diagram to be revised accordingly.

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ab2ade19a741861aa229182

User Id

a835e3de-f1a2-47e5-81af-fecd3ba0ce5e

Answers

Content: "The VFD shall be 6-pulse in accordance with the electrical one-line diagrams. This is addressed in Addendum 1. "
Answer Id: "04e088ac-b50f-45dd-8c76-ea1dee1dc47e"
Created At: "2026-09-28T23:29:02.343Z"
Is Disabled: false

Content

Should the VFD be 6-pulse as indicated on the electrical one-line diagrams, or 24-pulse as required by Specification Section 26 03 57?

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6abd2cef113069106475988f

User Id

24585408-b071-7095-0e6e-48f7c63ac777

Answers

Content: "Water will be provided by the City of Heath via an onsite fire hydrant."
Answer Id: "425fbc29-6e55-4563-87c3-c747d115988e"
Created At: "2026-09-30T21:01:22.058Z"
Is Disabled: false

Content

For water well 4, will water be provided by Heath or purchased from Rockwall?

Created At

Sep 30, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6abd352b163d488b2ae98c96

User Id

a835e3de-f1a2-47e5-81af-fecd3ba0ce5e

Answers

Content: "No approved equals will be evaluated during bidding."
Answer Id: "6f536dd2-a4ce-4557-8b0a-71f8e393e641"
Created At: "2026-09-30T21:02:13.162Z"
Is Disabled: false

Content

would Flowise Pumps be accepted as an approved equal for the Potable Water Well permanent pumping equipment?

Created At

Sep 30, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6abd69244436cf006bad9430

User Id

b36c8002-9543-45fa-b254-26917c58fae3

Answers

Content: "The CAT6e connection shown is intended for local communication between CP-01-004 and the existing PLC. Remote communication to the City’s SCADA system shall utilize the existing SCADA communication system. Per Note 8 on Sheet E19, Contractor shall provide all necessary PLC and radio hardware required for communication and integration into the City’s existing SCADA system and coordinate with the City’s system integrator. The existing PLC shall be reprogrammed as required to integrate the new well signals and transmit the data through the existing SCADA system. "
Answer Id: "c7435b9f-eac1-4755-9bc4-14e51f5a6e31"
Created At: "2026-10-02T21:06:24.592Z"
Is Disabled: false

Content

The Conduit Schedules show for well 4 on page E5- LP-01-004 carries a CAT6e run from CP-01-004 to the EXISTING PLC. Please clarify the need for this as the current Scada system uses 900mhZ spread spectrum serial radios. please address how we plan on sending data back to scada with no rohn tower/antenna or repeater EST nearby.

Created At

Sep 30, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6abd77a72f1361cf83be57ad

User Id

7b783c94-f076-4495-9ca5-31fe539a89c7

Answers

Content: "Meeting minutes and sign in sheet have been posted."
Answer Id: "5108c6de-6f55-4480-8c0c-151837b32176"
Created At: "2026-09-30T21:20:06.541Z"
Is Disabled: false

Content

Is a prebid meeting sigh in sheet available?

Created At

Sep 30, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6abe7844a163c1ce24a9bcaf

User Id

7e787eb9-dc8d-4313-abd7-30f1c684ea3b

Answers

Content: "All underground conduit shall be installed in concrete-encased duct bank."
Answer Id: "cbee0210-8a54-4f45-8c79-9ccf44ec2337"
Created At: "2026-10-08T23:36:43.586Z"
Is Disabled: false

Content

Sheet E18 shows a concrete duct bank detail on section #1. Is this needed for any of the underground electrical install, and if so where?

Created At

Oct 1, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ac7b384bc6506cf911db84e

User Id

7e787eb9-dc8d-4313-abd7-30f1c684ea3b

Answers

Content: "VFD cooling shall be designed by VFD manufacturer."
Answer Id: "6f6910cc-5f4b-483f-a236-08957f313c30"
Created At: "2026-10-08T23:36:26.57Z"
Is Disabled: false

Content

Addendum #3 pages E9A and E10A show the incoming filter, vfd, and sine wave filter to be air conditioned. Do the incoming filter and sine wave filter need to be air conditioned or can they be air cooled?

Created At

Oct 8, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ac7b3bcbc6506cf911db86c

User Id

7e787eb9-dc8d-4313-abd7-30f1c684ea3b

Answers

Content: "The equipment manufacturer shall design and fabricate the enclosure. "
Answer Id: "717dab4a-d378-49f4-be26-ed248fd268a4"
Created At: "2026-10-08T23:36:08.533Z"
Is Disabled: false

Content

Can you please provide us architecual or structural designs for the E9A and E10A filter, vfd, and sine wave filter enclosure?

Created At

Oct 8, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ac7b560bc6506cf911dba2a

User Id

7e787eb9-dc8d-4313-abd7-30f1c684ea3b

Answers

Content: "Sheet C2 from Addendum 3 supersedes the previously issued information on Sheet C1. The intent of the design is for the proposed 8-inch water line to connect to the dedicated fill line as shown on Sheet C2. This is not an alternate bid item."
Answer Id: "9e99aa02-dc73-4c0a-adf4-1738e05f16b4"
Created At: "2026-10-08T23:35:56.404Z"
Is Disabled: false

Content

Sheet C2 shows the 8" water line install to a dedicated fill line. This page is in conflict with sheet C1 which shows the line tying into the existing 18" water line. Is this an alternate price? Please clarify

Created At

Oct 8, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ac7b5ccbc6506cf911dbb7f

User Id

7e787eb9-dc8d-4313-abd7-30f1c684ea3b

Answers

Content: "No approved equals will be evaluated during bidding."
Answer Id: "fe7716cc-2a57-4ec8-9a1d-30dfb3c493a7"
Created At: "2026-10-08T23:35:04.106Z"
Is Disabled: false

Content

On sheet E9A and E10A would you accept the Yaskawa E100i VFD drive per manufacturer recommendation to eliminate the incoming power filter (Note 5). This IEEE-519 Compliant (<5% THD) drive has been recommended.

Created At

Oct 8, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ac7e39a346c6a2705531867

User Id

7e787eb9-dc8d-4313-abd7-30f1c684ea3b

Answers

Content: "This is addressed in Addendum 4."
Answer Id: "d315cfaa-afe8-4f58-aad9-57e01ee546ea"
Created At: "2026-10-08T23:38:07.842Z"
Is Disabled: false

Content

Page C2 Notes 1. and 4. note that the dedicated fill line and the mixing system will be designed by CB&I. Can you please provide those plans? We have reached out to CB&I and they have no info to provide us.

Created At

Oct 8, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ac8f8008b62650560361155

User Id

2c3724f6-c410-4cd9-b7cb-3921ffa8ef70

Answers

Content: "No approved equals will be evaluated during bidding."
Answer Id: "2b1719a9-8231-4f06-9fe6-26205cecaf8e"
Created At: "2026-10-09T17:40:52.316Z"
Is Disabled: false

Content

Can JCS Industries be considered an approved equal for the chlorination equipment?

Created At

Oct 9, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Detail

6aa9b943c7751fcbc9922ec4

Owner

City of Heath

Scope

Work of the project generally includes the installation of one potable water well at the City of Heath’s north elevated storage tank and one potable water well at the City of Heath’s pump station. The work at each well includes but is not limited to: Drilling and completion of two approximately 3,420 ft deep wells, installation of well casing, column pipe, blank liner, stainless steel screening, discharge piping, associated pipe appurtenances, electrical equipment, pump, motor, treatment, and site civil improvements.

State

Title

Heath Water Wells 2 & 4

County

Rockwall

Creator

Kimley-Horn

Map Data

Created At

Sep 15, 2026

Created By

34c8ab19-341a-48cc-993d-9226a6b9ec1f

Payment At

Sep 15, 2026

Release At

Sep 15, 2026

Updated At

Oct 2, 2026

Bid Details

Location

Heath City Hall

Bid At Info

Date At: Oct 20, 2026
Time Zone: America/Chicago

Is Released

Yes

Type Of Work

Water Well Construction

Answer Count

Contact Info

City: Dallas
Email: tanner.henson@kimley-horn.com
Phone: 6823485245
State: TX
Address: 13455 Noel Road Two Galleria Office Tower
Zip Code: 75240
Address2: STE 700
Last Name: Henson
First Name: Tanner
Company Name: Kimley-Horn

Is QAExpired

Yes

Permissions

Is TBA: No
Expire QA: Yes
Is Private: No
Is Visible: Yes
Allow Questions: Yes
Is Plans Official: Yes
Show Planholders List: Yes

Is Bid Expired

Document Count

Pre Bid Details

Location

Heath City Hall

Bid At Info

Date At: Sep 29, 2026
Time Zone: America/Chicago

Project Number

064467609

Question Count

Bid Buddy Sent At

Sep 15, 2026

Planholder Count

121

Qa Expiration Info

Date At: Oct 10, 2026
Time Zone: America/Chicago

Listing

Is TBA: No
State: TX
County: Rockwall
Bid Date: Oct 20, 2026
Has Ebid: No
Project Id: 6aa9b943c7751fcbc9922ec4
Is EBid Open: No
Project Title: Heath Water Wells 2 & 4

Documents

6aa9bad6c9dcb2be90311d34

Category

Bid Docs

Created At

Sep 15, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 24
Y: 34

Document Name

Heath Water Wells 2 & 4 PLANS

File Extension

pdf

Number Of Pages

6aa9bafec9dcb2be90311d35

Category

Bid Docs

Created At

Sep 15, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Heath Water Wells 2 & 4 SPECS

File Extension

pdf

Number Of Pages

705

6abaf754576d773c495400da

Category

Addenda

Created At

Sep 28, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Addendum 1

File Extension

pdf

Number Of Pages

6abd7cf04ac52474bd135ad2

Category

Other

Created At

Sep 30, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Pre bid conference minutes

File Extension

pdf

Number Of Pages

6abe71706f5af0da699b8eea

Category

Addenda

Created At

Oct 1, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Addendum 2

File Extension

pdf

Number Of Pages

6ac54f6ea582f12c7319324a

Category

Addenda

Created At

Oct 6, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Addendum 3

File Extension

pdf

Number Of Pages

6ac827efe02a1b7e67127658

Category

Addenda

Created At

Oct 8, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Addendum 4

File Extension

pdf

Number Of Pages

6ac92833f9d0db5a98434946

Category

Addenda

Created At

Oct 9, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Addendum 5

File Extension

pdf

Number Of Pages

View official postingOpens the original CivCast listing in a new tab

Surety · through Light RFPprequal free · bid bond free · p&p 3%

Need a bond for this one? Get prequalified once.

Most Texas work asks for the two below, and the solicitation documents are where it’s stated. One prequalification covers both — on this bid and the next.

Bid BondUsually 5–10% of your bid

Due with your bid

FreeGet this one →

Performance & Payment BondUsually 100% of the contract

Due after award

Flat 3%Get this one →

$0, forever48-hr responseA-ratedSoft pull

Prequalified contractors know they can be bonded before they write the bid — and skip the application on every one of these. The bond becomes a request form and a copy of the RFP, not a scramble at the deadline.Prequalify For Bonding →

What’s a good guy letter?

A surety’s written statement that it expects to bond you up to a stated amount, subject to final underwriting. It’s what a GC or agency asks to see before they take your bid seriously.

Bonding Directory Get a free bid bond

Not the right RFP for you?

Open opportunities in the same trade and area, with time left to bid

See all Excavating bids →

ExcavatingGeorge Road Low Water Crossing (Hunters Bow to NW Military Highway)City of San Antonio - M0152 · TexasDue Nov 0323 days ExcavatingARWA Carrizo System Expansion: Well DrillingAlliance Regional Water Authority · TexasDue Nov 0324 days ExcavatingNeed a Contractor to Assist the MSOGB with the Plugging, Remediation, and Reclamation of Orphaned WellsMS DEPT OF OIL AND GAS · MississippiDue Dec 1869 days AsphaltNew Waverly Station Sec 6Elevation Land Solutions, LLC · TexasDue Oct 2211 days

Not finding it?Describe the work in your own words and we’ll search the whole site.Search with AI →

Source: CivCast (project 6aa9b943c7751fcbc9922ec4), retrieved via CivCast, the bid board Texas civil engineers advertise on. View the official posting, and always confirm requirements and deadlines with the issuing agency.

Prequalify For Bondingknow you’re bondable · no bond scramble Bid bond

CivCast · Heath, TX

Heath Water Wells 2 & 4

City of HeathIssuing agency·Heath, TX·via CivCast, the bid board Texas civil engineers advertise on

9days left

Due Oct 20, 2026·Posted Sep 15, 2026

Prequalify For BondingBonding Prequal

AI takeaways

The City of Heath is soliciting bids for the construction of two potable water wells, Water Wells 2 & 4, in Heath, TX.
Bids are due October 13, 2026, with a pre-bid meeting on September 29, 2026, and questions due October 2, 2026.
The work includes drilling and completion of two approximately 3,420 ft deep wells, installation of well casing, column pipe, blank liner, stainless steel screening, discharge piping, electrical equipment, pump, motor, treatment, and site civil improvements.
The issuing agency is the City of Heath.
Requirement: Bidders must submit questions through the Q&A portal by the posted deadline of 11:45 PM, Friday, October 2, 2026.

Pre-bid: Sep 29

These takeaways are AI-generated and may be incomplete or wrong. Always verify every detail against the official documents before you bid.

Want to know if you can be bonded for this project? Get prequalified.One free application, soft pull — sized to your work.

Know you can be bonded before you spend a week on the bid
No scramble for a bond at the deadline — it becomes a request form
A good guy letter to show a GC or agency

Prequalify For Bonding →

Contact the buyer

Tanner Henson

tanner.henson@kimley-horn.comEmail 6823485245Phone

Location:

Rockwall County, TX

Open in Maps ↗

Project

6aa9b943c7751fcbc9922ec4

064467609

Category

Water Well Construction

Posted

Sep 15, 2026

Source

CivCast

What this bid is asking for

AI-generated

Install two potable water wells, each approximately 3,420 ft deep, at the City of Heath's north elevated storage tank and pump station.
Drill and complete the wells, including installation of well casing, column pipe, blank liner, stainless steel screening, and discharge piping.
Furnish and install electrical equipment, pump, motor, treatment systems, and perform site civil improvements.
Provide electrical and instrumentation work including switchboards, transformers, VFDs, and SCADA integration, including programming services by Supertech Automation.

Posted Scope of Work

Type of work: Water Well Construction

Pre-bid meeting: September 29, 2026 at 2:00 PM (Chicago) — Heath City Hall

Bid opening: October 20, 2026 at 2:00 PM (Chicago) — Heath City Hall

Questions due: October 9, 2026 at 11:45 PM (Chicago)

Questions asked: 20

Bid documents (download requires a free CivCast account):

Heath Water Wells 2 & 4 PLANS.pdf (Bid Docs) — 48 pp.
Heath Water Wells 2 & 4 SPECS.pdf (Bid Docs) — 705 pp.
Addendum 1.pdf (Addenda) — 2 pp.
Pre bid conference minutes.pdf (Other) — 4 pp.
Addendum 2.pdf (Addenda) — 1 pp.
Addendum 3.pdf (Addenda) — 61 pp.
Addendum 4.pdf (Addenda) — 95 pp.
Addendum 5.pdf (Addenda) — 43 pp.

Scope, read from the documentsAI-generated

More excavating bids in Texas, weekly.

We post new excavating opportunities in Texas as agencies publish them. Get them in one email — free, and unsubscribe whenever.

Questions & answers

AI-generated

When is the pre-bid meeting?

The pre-bid meeting is on September 29, 2026 at 2:00 PM (Chicago) at Heath City Hall.

When are bids due?

Bids are due on October 13, 2026 at 2:00 PM (Chicago) at Heath City Hall.

What is the deadline for submitting questions?

The deadline to ask questions is 10/02/2026 11:45 PM.

Who is the contact for this solicitation?

The contact is Tanner Henson at Kimley-Horn, email tanner.henson@kimley-horn.com, phone 6823485245.

Full source recordEvery field CivCast published, untouched

6aaa9233c9264aba03a75f4c

User Id

7b783c94-f076-4495-9ca5-31fe539a89c7

Answers

Content: "An estimated cost is not available."
Answer Id: "8e5784b6-38ec-4269-bee4-b631fba5e91e"
Created At: "2026-09-28T23:27:37.515Z"
Is Disabled: false

Content

Is there an estimated cost or cost range for this project?

Created At

Sep 16, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Id: 6ab1d8924f7293197057fd29
User Id: 10cf9d37-e809-41a2-81b3-be02123afdff
Content: SCA Consultants - Request for Clarification - Water Wells 2 & 4 - Bid Item No. 13, Electrical and Instrumentation Five items. Items 2, 3 and 4 affect price. ITEM 1. The CIVCAST portal and Instructions to Bidders 7.03 give different deadlines for written questions. The CIVCAST Questions tab for this Project displays: “The deadline to ask questions is 10/02/2026 11:45 PM.” The Invitation, under Obtaining the Bidding Documents, states: “Please submit questions for this project at least 7 business days prior to bid opening through www.civcastusa.com in the Q&A portal,” and seven business days before Tuesday, October 13, 2026 is Friday, October 2, 2026, which agrees with the portal. Instructions to Bidders 7.03 states that “Questions received less than seven days prior to the date for opening of Bids may not be answered,” which against the same bid date is Tuesday, October 6, 2026. A Bidder working from Instructions to Bidders 7.03 alone would believe two further business days remained. REQUEST: Please confirm by Addendum that the operative deadline for written questions is the posted 11:45 PM, Friday, October 2, 2026, and that Instructions to Bidders 7.03 is superseded for this solicitation, so that no Bidder relies on the later date. ITEM 2. No short circuit, protective device coordination or arc flash study is specified, while the switchboard breakers are specified to reduce arc flash incident energy. The switchboard section requires that “Breakers shall have LSIG trip unit with an alternate maintenance setting switch for reducing arc flash incident energy levels.” An energy-reducing maintenance setting is set against a calculated incident energy, and no calculation is called for: the terms arc flash study, short circuit study, coordination study and power system study appear nowhere in the Specifications, no Division 26 section governs such a study, and Bid Item No. 13 does not name one. The system these settings protect is not a simple one. Bid Item No. 13 establishes an 800 ampere main switchboard at Water Well 2 and a 600 ampere main switchboard at Water Well 4, each with a manual transfer switch and generator termination cabinet, each feeding a NEMA 3R 480:2,400 volt step-up isolation transformer of 450 kVA and 400 kVA respectively, a 2,400 volt VFD breaker enclosure and a NEMA 3R 6-pulse variable frequency drive serving a 2,300 volt three-phase motor. Nothing in the Contract Documents states the available fault current at either service point, the basis for the interrupting and short-circuit current ratings of the two switchboards, or how protective devices are to be coordinated across the step-up transformers to the medium-voltage drives. REQUEST: Please confirm whether a short circuit, protective device coordination and arc flash hazard analysis is required of the Contractor for both well sites. If it is, please state the Bid Item under which it is to be priced and the standard to which it is to be performed, and please provide the serving utility’s available short-circuit current and X/R ratio at each 480/277 volt service point so that the switchboard ratings and the breaker maintenance settings can be established. ITEM 3. Bid Item No. 13 includes a named third party’s programming services with no stated basis for pricing them. Bid Item No. 13, Electrical and Instrumentation, is measured for payment on a lump sum basis and states: “This bid item includes programming services by Supertech Automation for integrating the proposed well site into the City’s existing SCADA system, including reprogramming of the existing PLCs at the well sites and modification of the existing SCADA HMI.” No allowance amount, no not-to-exceed figure and no pass-through mechanism is stated for those services, and the Contract Documents contain no scope of services, point count or schedule for them. Bidders cannot price another firm’s services on a lump sum item without a stated basis, and no two Bids for Bid Item No. 13 will presently mean the same thing. REQUEST: Please state how Supertech Automation’s programming services are to be carried in Bid Item No. 13 — as a fixed allowance of a stated amount, as a direct pass-through at cost, or as the Contractor’s own subcontract — and, if the Contractor is to subcontract them, please issue Supertech Automation’s scope of services and a contact so that a quotation can be obtained before the Bid. ITEM 4. The division of responsibility between the named programming services and the Contractor’s control and SCADA scope is not stated. Bid Item No. 13 places “instrumentation, SCADA hardware, junction boxes, fittings, appurtenances, and accessories” in the Contractor’s scope at both wells. The Conduit Schedules show new Well Pump Control Panels CP-01-002 and CP-01-004 fed from panelboards LP-01-002 and LP-01-004, each receiving twenty-two conductors and a twisted shielded pair from its well pump terminal box, and the Well 4 Conduit Schedule carries a CAT6e run from CP-01-004 to the EXISTING PLC. The named services are described as reprogramming of the existing PLCs and modification of the existing SCADA HMI. REQUEST: Please confirm that the new Well Pump Control Panels, the new field instrumentation and the SCADA hardware named in Bid Item No. 13 are furnished, assembled, configured, field tested and commissioned by the Contractor, and that the named programming services are limited to reprogramming the existing PLCs and modifying the existing SCADA HMI. Please also confirm which party is responsible for point-to-point verification between the new control panels and the existing PLCs. ITEM 5. The Conduit Schedules carry a transformer tag collision at Water Well 4 and repeated destination errors at both wells. On the Water Well 4 Conduit Schedule, circuits 5 and 6 identify TRANSFORMER (XMFR-01-004) as the 480:2,400 volt step-up isolation transformer between the main switchboard and the VFD breaker enclosure, while circuits 10 and 11 identify TRANSFORMER (XMFR-01-004) again as the 480:120/240 volt panel transformer between the main switchboard and panelboard LP-01-004. At Water Well 2 the corresponding devices are correctly given two tags, XMFR-01-002 and XMFR-02-002. Separately, at both wells the circuits described as CHLORINE ROOM RECEPTACLES and CHLORINE ROOM LIGHTING are scheduled to terminate at AMMONIA ROOM RECEPTACLES and AMMONIA ROOM LIGHTING; the circuit described as CHLORINE ELECTRONIC SCALE POWER is scheduled to terminate at BOOSTER PUMP No. 1 at Well 2 and BOOSTER PUMP No. 3 at Well 4; and at Well 2 the CHLORINE ROOM HVAC UNIT is fed from LOAD CENTER (LP-02-001), the ammonia room load center, rather than from LP-02-002. REQUEST: Please issue a corrected Conduit Schedule for both wells by Addendum, assigning a distinct tag to the Water Well 4 panel transformer and correcting the destinations of the chlorine room receptacle, lighting, electronic scale and HVAC circuits.
Created At: Sep 22, 2026
Project Id: 6aa9b943c7751fcbc9922ec4

6ab1f5315e2583d6b33f5321

User Id

10cf9d37-e809-41a2-81b3-be02123afdff

Answers

Content: "This is addressed in Addendum 1."
Answer Id: "1e28efb7-1cb8-4b47-87f8-fdf27cef7f5b"
Created At: "2026-09-28T23:28:04.416Z"
Is Disabled: false

Content

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ab1f54f5e2583d6b33f5329

User Id

10cf9d37-e809-41a2-81b3-be02123afdff

Answers

Content: "Arc flash studies, fault current analyses, and breaker coordination studies are required for both well sites per Note 2 on Sheets E9 and E10. The contractor shall coordinate with the utility company to obtain transformer data for the new electrical service. "
Answer Id: "86f286da-f3b2-494c-9a9b-31fedd9ef472"
Created At: "2026-09-28T23:28:17.18Z"
Is Disabled: false

Content

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ab1f5695e2583d6b33f5333

User Id

10cf9d37-e809-41a2-81b3-be02123afdff

Answers

Content: "Bid Item No. 13 includes the programming services by Supertech Automation required to integrate the proposed well sites into the City’s existing SCADA system, including modifications to the existing PLC and SCADA HMI as indicated in the Contract Documents. Refer to Section 26 09 10, Instrumentation, including Paragraph 1.04, for system responsibility and coordination requirements. The Contractor shall coordinate directly with Supertech Automation during the bid period to establish the required scope of programming and integration services necessary to provide a complete and functional system and shall include the associated services in Bid Item No. 13."
Answer Id: "ab936f85-5bf6-49b7-8d85-80ffb1dde8af"
Created At: "2026-09-28T23:28:27.044Z"
Is Disabled: false

Content

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ab1f5825e2583d6b33f533f

User Id

10cf9d37-e809-41a2-81b3-be02123afdff

Answers

Content: "The contractor is responsible for furnishing, installing, and programming the proposed PLC at the well site. This responsibility also includes integrating the new PLC signals with the existing PLC system, modifying the existing PLC as required to accept those signals, and ensuring proper communication and reporting to the SCADA system. The contractor’s system integrator shall be responsible for reprogramming the existing PLC to accommodate the proposed Well 4 PLC signals, integrating the associated control and monitoring functions, and verifying operation between the new PLC, the existing PLC, and the SCADA system. "
Answer Id: "4fd4f80a-588e-473a-8c0f-7b2131d70c6c"
Created At: "2026-09-28T23:28:38.113Z"
Is Disabled: false

Content

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ab1f59d5e2583d6b33f534d

User Id

10cf9d37-e809-41a2-81b3-be02123afdff

Answers

Content: "Corrected Conduit Schedules have been provided in Addendum 1."
Answer Id: "21e8f489-ba54-4ea0-972a-e1079b62d664"
Created At: "2026-09-28T23:28:47.915Z"
Is Disabled: false

Content

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ab2adb99a741861aa22917d

User Id

a835e3de-f1a2-47e5-81af-fecd3ba0ce5e

Answers

Content: "Contractor shall bid the project as designed and indicated in the contract documents."
Answer Id: "584f6993-acf2-4592-8655-355acbada4b2"
Created At: "2026-09-30T20:59:53.929Z"
Is Disabled: true

Content: "This is addressed in Addendum 3."
Answer Id: "10028716-2e81-4f09-859b-68337f2ff851"
Created At: "2026-10-08T17:58:33.469Z"
Is Disabled: false

Content

In lieu of a 2,300 V VFD, would a low-voltage VFD be acceptable? This would require the transformer configuration shown on the one-line diagram to be revised accordingly.

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ab2ade19a741861aa229182

User Id

a835e3de-f1a2-47e5-81af-fecd3ba0ce5e

Answers

Content: "The VFD shall be 6-pulse in accordance with the electrical one-line diagrams. This is addressed in Addendum 1. "
Answer Id: "04e088ac-b50f-45dd-8c76-ea1dee1dc47e"
Created At: "2026-09-28T23:29:02.343Z"
Is Disabled: false

Content

Should the VFD be 6-pulse as indicated on the electrical one-line diagrams, or 24-pulse as required by Specification Section 26 03 57?

Created At

Sep 22, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6abd2cef113069106475988f

User Id

24585408-b071-7095-0e6e-48f7c63ac777

Answers

Content: "Water will be provided by the City of Heath via an onsite fire hydrant."
Answer Id: "425fbc29-6e55-4563-87c3-c747d115988e"
Created At: "2026-09-30T21:01:22.058Z"
Is Disabled: false

Content

For water well 4, will water be provided by Heath or purchased from Rockwall?

Created At

Sep 30, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6abd352b163d488b2ae98c96

User Id

a835e3de-f1a2-47e5-81af-fecd3ba0ce5e

Answers

Content: "No approved equals will be evaluated during bidding."
Answer Id: "6f536dd2-a4ce-4557-8b0a-71f8e393e641"
Created At: "2026-09-30T21:02:13.162Z"
Is Disabled: false

Content

would Flowise Pumps be accepted as an approved equal for the Potable Water Well permanent pumping equipment?

Created At

Sep 30, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6abd69244436cf006bad9430

User Id

b36c8002-9543-45fa-b254-26917c58fae3

Answers

Content: "The CAT6e connection shown is intended for local communication between CP-01-004 and the existing PLC. Remote communication to the City’s SCADA system shall utilize the existing SCADA communication system. Per Note 8 on Sheet E19, Contractor shall provide all necessary PLC and radio hardware required for communication and integration into the City’s existing SCADA system and coordinate with the City’s system integrator. The existing PLC shall be reprogrammed as required to integrate the new well signals and transmit the data through the existing SCADA system. "
Answer Id: "c7435b9f-eac1-4755-9bc4-14e51f5a6e31"
Created At: "2026-10-02T21:06:24.592Z"
Is Disabled: false

Content

Created At

Sep 30, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6abd77a72f1361cf83be57ad

User Id

7b783c94-f076-4495-9ca5-31fe539a89c7

Answers

Content: "Meeting minutes and sign in sheet have been posted."
Answer Id: "5108c6de-6f55-4480-8c0c-151837b32176"
Created At: "2026-09-30T21:20:06.541Z"
Is Disabled: false

Content

Is a prebid meeting sigh in sheet available?

Created At

Sep 30, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6abe7844a163c1ce24a9bcaf

User Id

7e787eb9-dc8d-4313-abd7-30f1c684ea3b

Answers

Content: "All underground conduit shall be installed in concrete-encased duct bank."
Answer Id: "cbee0210-8a54-4f45-8c79-9ccf44ec2337"
Created At: "2026-10-08T23:36:43.586Z"
Is Disabled: false

Content

Sheet E18 shows a concrete duct bank detail on section #1. Is this needed for any of the underground electrical install, and if so where?

Created At

Oct 1, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ac7b384bc6506cf911db84e

User Id

7e787eb9-dc8d-4313-abd7-30f1c684ea3b

Answers

Content: "VFD cooling shall be designed by VFD manufacturer."
Answer Id: "6f6910cc-5f4b-483f-a236-08957f313c30"
Created At: "2026-10-08T23:36:26.57Z"
Is Disabled: false

Content

Created At

Oct 8, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ac7b3bcbc6506cf911db86c

User Id

7e787eb9-dc8d-4313-abd7-30f1c684ea3b

Answers

Content: "The equipment manufacturer shall design and fabricate the enclosure. "
Answer Id: "717dab4a-d378-49f4-be26-ed248fd268a4"
Created At: "2026-10-08T23:36:08.533Z"
Is Disabled: false

Content

Can you please provide us architecual or structural designs for the E9A and E10A filter, vfd, and sine wave filter enclosure?

Created At

Oct 8, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ac7b560bc6506cf911dba2a

User Id

7e787eb9-dc8d-4313-abd7-30f1c684ea3b

Answers

Content: "Sheet C2 from Addendum 3 supersedes the previously issued information on Sheet C1. The intent of the design is for the proposed 8-inch water line to connect to the dedicated fill line as shown on Sheet C2. This is not an alternate bid item."
Answer Id: "9e99aa02-dc73-4c0a-adf4-1738e05f16b4"
Created At: "2026-10-08T23:35:56.404Z"
Is Disabled: false

Content

Created At

Oct 8, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ac7b5ccbc6506cf911dbb7f

User Id

7e787eb9-dc8d-4313-abd7-30f1c684ea3b

Answers

Content: "No approved equals will be evaluated during bidding."
Answer Id: "fe7716cc-2a57-4ec8-9a1d-30dfb3c493a7"
Created At: "2026-10-08T23:35:04.106Z"
Is Disabled: false

Content

Created At

Oct 8, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ac7e39a346c6a2705531867

User Id

7e787eb9-dc8d-4313-abd7-30f1c684ea3b

Answers

Content: "This is addressed in Addendum 4."
Answer Id: "d315cfaa-afe8-4f58-aad9-57e01ee546ea"
Created At: "2026-10-08T23:38:07.842Z"
Is Disabled: false

Content

Created At

Oct 8, 2026

Project Id

6aa9b943c7751fcbc9922ec4

6ac8f8008b62650560361155

User Id

2c3724f6-c410-4cd9-b7cb-3921ffa8ef70

Answers

Content: "No approved equals will be evaluated during bidding."
Answer Id: "2b1719a9-8231-4f06-9fe6-26205cecaf8e"
Created At: "2026-10-09T17:40:52.316Z"
Is Disabled: false

Content

Can JCS Industries be considered an approved equal for the chlorination equipment?

Created At

Oct 9, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Detail

6aa9b943c7751fcbc9922ec4

Owner

City of Heath

Scope

State

Title

Heath Water Wells 2 & 4

County

Rockwall

Creator

Kimley-Horn

Map Data

Created At

Sep 15, 2026

Created By

34c8ab19-341a-48cc-993d-9226a6b9ec1f

Payment At

Sep 15, 2026

Release At

Sep 15, 2026

Updated At

Oct 2, 2026

Bid Details

Location

Heath City Hall

Bid At Info

Date At: Oct 20, 2026
Time Zone: America/Chicago

Is Released

Yes

Type Of Work

Water Well Construction

Answer Count

Contact Info

City: Dallas
Email: tanner.henson@kimley-horn.com
Phone: 6823485245
State: TX
Address: 13455 Noel Road Two Galleria Office Tower
Zip Code: 75240
Address2: STE 700
Last Name: Henson
First Name: Tanner
Company Name: Kimley-Horn

Is QAExpired

Yes

Permissions

Is TBA: No
Expire QA: Yes
Is Private: No
Is Visible: Yes
Allow Questions: Yes
Is Plans Official: Yes
Show Planholders List: Yes

Is Bid Expired

Document Count

Pre Bid Details

Location

Heath City Hall

Bid At Info

Date At: Sep 29, 2026
Time Zone: America/Chicago

Project Number

064467609

Question Count

Bid Buddy Sent At

Sep 15, 2026

Planholder Count

121

Qa Expiration Info

Date At: Oct 10, 2026
Time Zone: America/Chicago

Listing

Is TBA: No
State: TX
County: Rockwall
Bid Date: Oct 20, 2026
Has Ebid: No
Project Id: 6aa9b943c7751fcbc9922ec4
Is EBid Open: No
Project Title: Heath Water Wells 2 & 4

Documents

6aa9bad6c9dcb2be90311d34

Category

Bid Docs

Created At

Sep 15, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 24
Y: 34

Document Name

Heath Water Wells 2 & 4 PLANS

File Extension

pdf

Number Of Pages

6aa9bafec9dcb2be90311d35

Category

Bid Docs

Created At

Sep 15, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Heath Water Wells 2 & 4 SPECS

File Extension

pdf

Number Of Pages

705

6abaf754576d773c495400da

Category

Addenda

Created At

Sep 28, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Addendum 1

File Extension

pdf

Number Of Pages

6abd7cf04ac52474bd135ad2

Category

Other

Created At

Sep 30, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Pre bid conference minutes

File Extension

pdf

Number Of Pages

6abe71706f5af0da699b8eea

Category

Addenda

Created At

Oct 1, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Addendum 2

File Extension

pdf

Number Of Pages

6ac54f6ea582f12c7319324a

Category

Addenda

Created At

Oct 6, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Addendum 3

File Extension

pdf

Number Of Pages

6ac827efe02a1b7e67127658

Category

Addenda

Created At

Oct 8, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Addendum 4

File Extension

pdf

Number Of Pages

6ac92833f9d0db5a98434946

Category

Addenda

Created At

Oct 9, 2026

Project Id

6aa9b943c7751fcbc9922ec4

Dimensions

X: 8.5
Y: 11

Document Name

Addendum 5

File Extension

pdf

Number Of Pages

View official postingOpens the original CivCast listing in a new tab

Surety · through Light RFPprequal free · bid bond free · p&p 3%

Need a bond for this one? Get prequalified once.

Most Texas work asks for the two below, and the solicitation documents are where it’s stated. One prequalification covers both — on this bid and the next.

Bid BondUsually 5–10% of your bid

Due with your bid

FreeGet this one →

Performance & Payment BondUsually 100% of the contract

Due after award

Flat 3%Get this one →

$0, forever48-hr responseA-ratedSoft pull

What’s a good guy letter?

A surety’s written statement that it expects to bond you up to a stated amount, subject to final underwriting. It’s what a GC or agency asks to see before they take your bid seriously.

Bonding Directory Get a free bid bond

Not the right RFP for you?

Open opportunities in the same trade and area, with time left to bid

See all Excavating bids →

Not finding it?Describe the work in your own words and we’ll search the whole site.Search with AI →

Prequalify For Bondingknow you’re bondable · no bond scramble Bid bond