NYC Government · New York

Installation of Styrene-Butadiene-Styrene (SBS) Modified Bitumen Roofing System

Design and ConstructionIssuing agency·New York·via NYC Open Data

Open

See the official notice for the deadline·Posted Nov 12, 2024

AI takeaways

The New York City Department of Design and Construction is establishing a pre-qualified list of contractors for SBS modified bitumen roofing system installation.
The estimated construction cost for these roof projects ranges from $100,000 to $10,000,000.
The procurement method is a Request for Qualifications.
The solicitation was posted on 2024-11-12.
Responses are due by 2099-11-18.
Requirement: Contractors must be pre-qualified to be on the PQL.

Est. value: $100,000 to…
Method: Request for Qualifications

These takeaways are AI-generated and may be incomplete or wrong. Always verify every detail against the official documents before you bid.

Contact the buyer

Lorraine Holley

csb_projectinquiries@ddc.nyc.govEmail (718) 391-1362Phone

Request

20241104008

N/A

Method

Request for Qualifications

More roofing bids in New York, weekly.

We post new roofing opportunities in New York as agencies publish them. Get them in one email — free, and unsubscribe whenever.

What this bid is asking for

AI-generated

Furnish all labor, materials, and equipment necessary to install a Styrene-Butadiene-Styrene Modified Bitumen roofing system.
Install a roofing system such as Siplast P2030, GAF SBS Ruberoid Heat Weld, or approved equal.
Become pre-qualified to be on the DDC's pre-qualified list (PQL) for these types of roof projects.

Requirements

From the documents

Estimated value: $100,000 to $10,000,000

Posted Scope of Work

The New York City (the City) Department of Design and Construction (DDC or the Department) is in the process of establishing a pre-qualified list (PQL) of contractors for furnishing all labor, materials and equipment, necessary and required to install a Styrene-Butadiene-Styrene Modified Bitumen roofing system such as Siplast P2030, GAF SBS Ruberoid Heat Weld, or approved equal for various capital construction projects. It is anticipated that the estimated construction cost for these types of roof projects will range from $100,000 to $10,000,000.

https://www.nyc.gov/site/mocs/passport/getting-started-with-passport.page

Questions & answers

AI-generated

What is the estimated cost range for these roof projects?

The estimated construction cost for these types of roof projects will range from $100,000 to $10,000,000.

Who is the contact person for this solicitation?

The contact person is Lorraine Holley.

What is the procurement method for this solicitation?

The procurement method is a Request for Qualifications.

Full source recordEvery field NYC City Record published, untouched

Listing

Pin: N/A
Email: csb_projectinquiries@ddc.nyc.gov
Due Date: Nov 18, 2099
End Date: Nov 12, 2024
Request Id: 20241104008
Start Date: Nov 12, 2024
Agency Name: Design and Construction
Short Title: Installation of Styrene-Butadiene-Styrene (SBS) Modified Bitumen Roofing System
Contact Name: Lorraine Holley
Section Name: Procurement
Contact Phone: (718) 391-1362
Address To Request: .
Category Description: Construction/Construction Services
Additional Description 1: The New York City (the City) Department of Design and Construction (DDC or the Department) is in the process of establishing a pre-qualified list (PQL) of contractors for furnishing all labor, materials and equipment, necessary and required to install a Styrene-Butadiene-Styrene Modified Bitumen roofing system such as Siplast P2030, GAF SBS Ruberoid Heat Weld, or approved equal for various capital construction projects. It is anticipated that the estimated construction cost for these types of roof projects will range from $100,000 to $10,000,000.https://www.nyc.gov/site/mocs/passport/getting-started-with-passport.page
Type Of Notice Description: Solicitation
Selection Method Description: Request for Qualifications

State By

gazetteer

Categorized By

llm

Not the right RFP for you?

Open opportunities in the same trade and area, with time left to bid

See all Roofing bids →

RoofingNY State Contract ReporterBolton Point Office Roof ReplacementSouthern Cayuga Lake Intermunicipal Water Commission — Production · New YorkSep 0828 days left RoofingFederal · SAM.govTINKER AFB MAC BOA WWYK250131 Replace Ridge Cap on Hangar Roof, B824Department of Defense · Tinker Afb, OKSep 1030 days left General ContractorsNY State Contract ReporterRehabilitation, Preservation, and Operation of Schoellkopf Hall at DeVeaux Woods State ParkParks Recreation & Historic Preservation, NYS Office of — Concessions Management Bureau · Niagara Falls, NYOct 1464 days left Carpentry/GlazieryNY State Contract ReporterCUNY Graduate School of Public Health and Health Policy - New Workstations, Glazing Upgrade for Storefront, IT and HVAC WorkCity University of New York (CUNY) — Office of Facilities Planning,Construction, & Management · New YorkSep 0828 days left

Let our AI help you find the right opportunitySearch with AI →

Source: NYC City Record (request 20241104008), retrieved via NYC Open Data. View the official posting , always confirm requirements and deadlines with the issuing agency.

NYC Government · New York

Installation of Styrene-Butadiene-Styrene (SBS) Modified Bitumen Roofing System

Design and ConstructionIssuing agency·New York·via NYC Open Data

Open

See the official notice for the deadline·Posted Nov 12, 2024

AI takeaways

The New York City Department of Design and Construction is establishing a pre-qualified list of contractors for SBS modified bitumen roofing system installation.
The estimated construction cost for these roof projects ranges from $100,000 to $10,000,000.
The procurement method is a Request for Qualifications.
The solicitation was posted on 2024-11-12.
Responses are due by 2099-11-18.
Requirement: Contractors must be pre-qualified to be on the PQL.

Est. value: $100,000 to…
Method: Request for Qualifications

These takeaways are AI-generated and may be incomplete or wrong. Always verify every detail against the official documents before you bid.

Contact the buyer

Lorraine Holley

csb_projectinquiries@ddc.nyc.govEmail (718) 391-1362Phone

Request

20241104008

N/A

Method

Request for Qualifications

More roofing bids in New York, weekly.

We post new roofing opportunities in New York as agencies publish them. Get them in one email — free, and unsubscribe whenever.

What this bid is asking for

AI-generated

Furnish all labor, materials, and equipment necessary to install a Styrene-Butadiene-Styrene Modified Bitumen roofing system.
Install a roofing system such as Siplast P2030, GAF SBS Ruberoid Heat Weld, or approved equal.
Become pre-qualified to be on the DDC's pre-qualified list (PQL) for these types of roof projects.

Requirements

From the documents

Estimated value: $100,000 to $10,000,000

Posted Scope of Work

https://www.nyc.gov/site/mocs/passport/getting-started-with-passport.page

Questions & answers

AI-generated

What is the estimated cost range for these roof projects?

The estimated construction cost for these types of roof projects will range from $100,000 to $10,000,000.

Who is the contact person for this solicitation?

The contact person is Lorraine Holley.

What is the procurement method for this solicitation?

The procurement method is a Request for Qualifications.

Full source recordEvery field NYC City Record published, untouched

Listing

Pin: N/A
Email: csb_projectinquiries@ddc.nyc.gov
Due Date: Nov 18, 2099
End Date: Nov 12, 2024
Request Id: 20241104008
Start Date: Nov 12, 2024
Agency Name: Design and Construction
Short Title: Installation of Styrene-Butadiene-Styrene (SBS) Modified Bitumen Roofing System
Contact Name: Lorraine Holley
Section Name: Procurement
Contact Phone: (718) 391-1362
Address To Request: .
Category Description: Construction/Construction Services
Additional Description 1: The New York City (the City) Department of Design and Construction (DDC or the Department) is in the process of establishing a pre-qualified list (PQL) of contractors for furnishing all labor, materials and equipment, necessary and required to install a Styrene-Butadiene-Styrene Modified Bitumen roofing system such as Siplast P2030, GAF SBS Ruberoid Heat Weld, or approved equal for various capital construction projects. It is anticipated that the estimated construction cost for these types of roof projects will range from $100,000 to $10,000,000.https://www.nyc.gov/site/mocs/passport/getting-started-with-passport.page
Type Of Notice Description: Solicitation
Selection Method Description: Request for Qualifications

State By

gazetteer

Categorized By

llm

Not the right RFP for you?

Open opportunities in the same trade and area, with time left to bid

See all Roofing bids →

Let our AI help you find the right opportunitySearch with AI →

Source: NYC City Record (request 20241104008), retrieved via NYC Open Data. View the official posting , always confirm requirements and deadlines with the issuing agency.